Pellet Fan
Accessories & Essentials => Pellets -- comments & questions => Topic started by: MN-Smoker on January 01, 2018, 09:46:39 PM
-
I've been using these since I bought my grill.
One thing I've noticed is a shockingly low amount of ash so far.
I have a Firecraft Q450, and I seldom vacuum out the ashes because they're minimal.
I usually do shorter cooks, but way less ash than the Pit Boss Pellets I was burning.
-
I may have to try some heating pellets. My uncle has a pellet stove to heat his house and paid $250 for a ton of pellets and says the brand he has now are the best burning ones he has ever used.
-
I was reviewing wood pellets and came across an interesting statement: Hardwood pellets, premium or not may be classified food grade as long as they don't contain additives or binders.
-
I was reviewing wood pellets and came across an interesting statement: Hardwood pellets, premium or not may be classified food grade as long as they don't contain additives or oils..
1. "[M]ay be classified food grade..." Is there a Canadian certifying body, like the U.S. Underwriters Laboratory, for classifying pellets?
2. I recall reading that some Traeger pellets are "flavored" with oil. It appears that would keep them from food grade classification.
-
I was reviewing wood pellets and came across an interesting statement: Hardwood pellets, premium or not may be classified food grade as long as they don't contain additives or oils..
1. "[M]ay be classified food grade..." Is there a Canadian certifying body, like the U.S. Underwriters Laboratory, for classifying pellets?
2. I recall reading that some Traeger pellets are "flavored" with oil. It appears that would keep them from food grade classification. I misquoted; oils should have been binders.
1/ I am not aware of any Canadian governing bodies related to wood pellets..2/ Traeger,as far as I know, uses soybean oil sprayed onto the processed wood to reduce friction in the forming dies. I can only speculate it is to save money resulting from reduced friction... The flavouring that goes into the hickory and mesquite pellets is derived from liquid smoke. That way they can use their base wood being either oak or alder, depending on the pellet mill location to make them. The other pellets are mostly base wood with about 30% of the spices wood added, except;alder,maple and oak, depending on the mills location. Oak in the East would be 100% oak. In the West it would be 70 alder/30% oak. At least that is how it used to be. I always wondered why all Traeger pellets cost the same regardless of wood species. The cost of the different woods isn't the same. Makes a person think.