Pit Talk -- Comments and Questions Regarding These Pellet Pits > FEC/Cookshack
PG500 vs PG100 Stainless Steel quality
MadFoodScientist:
I am planning to purchase a FEC and am trying to determine which model to go with. I received this message from Cookshack when I asked them about the kind of stainless steel used in their grills:
"We use two different kinds of stainless in our grills. The PG500 has:
SS, Sheet, 14GA #3, 430
SS, Sheet, 18GA #3, 430.
The PG1000 includes:
SS Sheet, 201, 20G, 2B
SS Sheet, 201, 20G, #3."
I am not all that familiar with 201 SS (I had previously been under the impression that the PG1000 was made with 304 SS). I was wondering if anyone had an opinion on these differences in SS and if either would hold up better than the other. I appreciate any insights that will make me a more informed buyer!
Bentley:
How close to the ocean are you? I know Larry loved his 1000, great pit, cooked on his a few times...but to me, the 500 was just a better looking pit! I guess that is just personal preference!
ype 201 is less resistant to corrosion than 300 series. It does have higher yield strength. Some typical end uses include cooking utensils, kitchen equipment, hose clamps, truck trailer structures.
Type 302 resists oxidation, easy fabrication, easy to clean, high strength with low weight. Used for utensils, cookware, and stainless flatware.
Type 304, 304L serves a wide range of applications. It withstands ordinary rusting in architecture, it is resistant to food processing environments, it resists organic chemicals, dyestuffs, and a wide variety of inorganic chemicals
Type 430 has lower alloy content than type 304 and is used for highly polished trim applications in mild atmospheres. Has good formability, ductility, low work hardening, corrosion resistant, oxidation resistant, good thermal conductivity, attractive finish, and excellent for drawing. It is used in nitric acid and food processing. Other common uses include heat exchangers, vaults, tubing, builder’s hardware, kitchen trims and appliance trims.
MadFoodScientist:
Thanks for the info and response Bentley! I currently live in the Dallas, TX area so not close to the ocean. I do have a lot of family in Florida. I have no plans to move but Florida would be high on the list if I ever did move. Does feel silly to base my purchase around an off chance that some day in the future I may move near an ocean! I think I am also extra concerned about corrosion because my last pellet grill has rusted after 3 years :( It was not stainless steel.
From my research on-line and from what you posted, it is not clear if 201 would be an advantage for corrosion vs 430.
Thanks again!
MadFoodScientist:
InThePit- I like your perspective. I am leaning towards the PG500. Seems like an awesome pit and a huge upgrade over my current pit!
Bobitis:
--- Quote from: Bentley on September 06, 2017, 12:19:36 PM ---How close to the ocean are you? I know Larry loved his 1000, great pit, cooked on his a few times...but to me, the 500 was just a better looking pit! I guess that is just personal preference!
ype 201 is less resistant to corrosion than 300 series. It does have higher yield strength. Some typical end uses include cooking utensils, kitchen equipment, hose clamps, truck trailer structures.
Type 302 resists oxidation, easy fabrication, easy to clean, high strength with low weight. Used for utensils, cookware, and stainless flatware.
Type 304, 304L serves a wide range of applications. It withstands ordinary rusting in architecture, it is resistant to food processing environments, it resists organic chemicals, dyestuffs, and a wide variety of inorganic chemicals
Type 430 has lower alloy content than type 304 and is used for highly polished trim applications in mild atmospheres. Has good formability, ductility, low work hardening, corrosion resistant, oxidation resistant, good thermal conductivity, attractive finish, and excellent for drawing. It is used in nitric acid and food processing. Other common uses include heat exchangers, vaults, tubing, builder’s hardware, kitchen trims and appliance trims.
--- End quote ---
Not to be combative, but I have many customers in 'salt water' industries (fishing, ferries, coast guard, etc.). The unanimous conclusion is... It's personal choice/experience. Some swear by 316L, and others poo poo it in favor of 304L. I've no idea why, because the metallurgical content for both is an ASTM/ASME requirement. I can only assume it has to do with the function It's used for.
Because a pellet smoker is pretty much benign, Id go for the least expensive version.
Navigation
[0] Message Index
[#] Next page
Go to full version