Pit Talk -- Comments and Questions Regarding These Pellet Pits > Firecraft

FireCraft Q450 Face plate Switch Wiring

(1/1)

Mikro:
Hi All, Been a while since I posted. Thought I would leave this here for those having issues with the Q450 buttons not working. I will be using momentary switches on a new panel I am making to replace the membrane switches. Will have to make a new wiring harness to the pins for this to work.

Here is a look at the wiring for anyone wanting to know where things go. BTW the ground is a common ground to all of the switches.

MK

Canadian John:
 
 Excellent and very informative post. The photos are excellent.   This may very well help someone else..Thank you!

 I would like to see your switch layout once its done.

Mikro:

--- Quote from: Canadian John on May 18, 2020, 09:01:41 AM ---
 Excellent and very informative post. The photos are excellent.   This may very well help someone else..Thank you!

 I would like to see your switch layout once its done.

--- End quote ---
No problem John and thank you. I have a few designs I am working on. My thought process is to move them to the left to cut down on any heat problems from the firebox as I plan on using plastic or wood for it to keep cost down. Milling a new aluminum face plate is time consuming and not cost effective. I figure people will be having issues with the Lousiana grill that has this board as well.

Mike

Bentley:
Bump.

Navigation

[0] Message Index