Pages:
Actions
  • #136 by GREG-B on 03 Oct 2023
  • Anybody here familiar with the Blackstone 4 burner griddle?  Finally got one the other day.  Opted for the 60,000 BTU one opposed to the 36,000 BTU.  Finished assembling it this morning.  Yay.  Cranked it up to high like the instructions said and seasoned it 3 times.  It had been on about 1/2 hour on high and I had good flames in all 4 burners, (they were glowing red on top of the heating elements) I thought I would experiment with an egg to see how it functioned.  Either it needed more time to heat soak or 60,000 BTU's  isn't gonna cut it.  The egg took entirely too long to cook.  I'll try burgers next and preheat an hour and see how they fair when we return from the coast this weekend. 
  • #137 by BigDave83 on 04 Oct 2023
  • Anybody here familiar with the Blackstone 4 burner griddle?  Finally got one the other day.  Opted for the 60,000 BTU one opposed to the 36,000 BTU.  Finished assembling it this morning.  Yay.  Cranked it up to high like the instructions said and seasoned it 3 times.  It had been on about 1/2 hour on high and I had good flames in all 4 burners, (they were glowing red on top of the heating elements) I thought I would experiment with an egg to see how it functioned.  Either it needed more time to heat soak or 60,000 BTU's  isn't gonna cut it.  The egg took entirely too long to cook.  I'll try burgers next and preheat an hour and see how they fair when we return from the coast this weekend.

    That doesn't sound right. I have a 3 burner 28 and I will turn it on and get my stuff brought out and I am ready to cook normally. I never timed it but I would say on high I give mine 10 minutes maybe before I start cooking, except for bacon I put it on as soon as I fire it up.

    How fast did it heat up when you did your seasoning?
  • #138 by rfinley on 04 Oct 2023
  • Anybody here familiar with the Blackstone 4 burner griddle?  Finally got one the other day.  Opted for the 60,000 BTU one opposed to the 36,000 BTU.  Finished assembling it this morning.  Yay.  Cranked it up to high like the instructions said and seasoned it 3 times.  It had been on about 1/2 hour on high and I had good flames in all 4 burners, (they were glowing red on top of the heating elements) I thought I would experiment with an egg to see how it functioned.  Either it needed more time to heat soak or 60,000 BTU's  isn't gonna cut it.  The egg took entirely too long to cook.  I'll try burgers next and preheat an hour and see how they fair when we return from the coast this weekend.

    How to Reset Your Propane Tank OPD Valve Low Gas Flow Fix

    This has got me a couple times with our Blackstone 4 burner griddle. Quick search will give you a bunch of videos on how to reset it.  https://www.youtube.com/watch?v=Z-1kLrLis9U
  • #139 by slaga on 04 Oct 2023
  • On my 36", 4-burner Blackstone griddle, it takes about 10 - 15 minutes with all 4 burners on low to reach 350 to 400 degrees. I have not cooked eggs yet though. Cheese steaks and smash burgers are my favorite so far. Hash browns were great as well.
  • #140 by elenis on 04 Oct 2023
  • I have the 4 burner Blackstone and normally have to cook most stuff on low depending on ambient temperature or it cooks so fast outside wise I can't cook things through. One thing I did though is we have crazy wind here most of the time and with that wind and winter it felt slow to heat up so I got wind guards to go on it. Those also keep heat in which is why I have to cook on low most of the time. If I have it on medium for 5-10 minutes the oil on the blackstone is smoking it is so hot.
  • #141 by Bentley on 04 Oct 2023
  • Wind?
  • #142 by Hank D Thoreau on 05 Oct 2023
  • I have the 4 burner Blackstone and normally have to cook most stuff on low depending on ambient temperature or it cooks so fast outside wise I can't cook things through. One thing I did though is we have crazy wind here most of the time and with that wind and winter it felt slow to heat up so I got wind guards to go on it. Those also keep heat in which is why I have to cook on low most of the time. If I have it on medium for 5-10 minutes the oil on the blackstone is smoking it is so hot.

    I live in a warm weather climate and cook mostly on high on my Blackstone.

    I was trying to cook scrambled eggs on a Coleman stove in the Alabama Hills below Mt Whitney. It was so cold that I could hardly get the eggs to cook. Later in the day, I was able to cook dinner just fine.

    The wind can really suck the energy out of a stove.
  • #143 by GREG-B on 05 Oct 2023
  • No wind, had it set up in the barn. When i get home, I’ll try “resetting” like rfinley said. I’ve got a 60,000 btu turkey cooking burner that the neighbors in the next block could hear. This thing was very quiet so the safety valve is a likely culprit. Will post more when I get home. Thanks.
  • #144 by BigDave83 on 05 Oct 2023
  • No wind, had it set up in the barn. When i get home, I’ll try “resetting” like rfinley said. I’ve got a 60,000 btu turkey cooking burner that the neighbors in the next block could hear. This thing was very quiet so the safety valve is a likely culprit. Will post more when I get home. Thanks.

    Difference in burners between your BS and the fryer. the fryer is a high pressure burner the BS is lower and has 4 burners.

    You said the burners were red so it would make me think the regulator wasn't tripped. But one never knows.

    You had blue flame and not yellow and orange?

    Do you have one of the IR heat guns to measure surface temps?


  • #145 by GREG-B on 06 Oct 2023
  • Just got home and finished unpacking and a few other chores.  Went out and hooked up tank and carefully opened valve on the tank.  Hit the ignitor and adjusted the flame to low, then high.  It's working fine now so, must have fumbled the ball when I turned everything on before.  All is good, guess I'll keep it now.  No I don't have an infrared thermometer, guess it would be something to consider in the near future.  Thanks for all the information guys. 
  • #146 by BigDave83 on 09 Oct 2023
  • Tonight was chicken fritters.

    Diced up chicken breast  add in  1 or 2 eggs depending on how much chicken you have, some flour 1/4 cup or so, some mayo, some shredded cheese, some fine diced onion, salt, pepper, some dried dill (not to much it will over power). I will usually add in some fresh garlic but mine was not any good, so it was granulated garlic. Use some almond or coconut flour if you want to leave out the carbs and it to be more keto friendly.

     I like to mix it up and put in the fridge for a couple hours before scooping out and spreading it on the griddle to fry. Made a chipotle mayo to dip in, the same thing we use on our quesadillas.
  • #147 by Bentley on 10 Nov 2023




  • #148 by BigDave83 on 06 May 2024
  • Tonight tried what all the cool kids are making on their griddles these days. Crack Burgers, now it could be they named them this because they are to be addicting or is could be that they crack into pieces when you flip them.

    1 pound 80/20 ground beef
    3 tablespoons sour cream
    3 tablespoons ranch dressing powder. I used spicy.
    1/4 cup cooked crumbled bacon, some used the bagged stuff from the store, I had bacon so I cooked it.
    1 cup shredded cheese, I think most used cheddar, i used bagged extra sharp cheddar.

     Now some put them in to molds and some made balls and flattened.I used 1.5 pound of meat and adjusted the other ingredients, mixed well, I made four 150 gram balls and four 100 gram balls. The lager ones i figured I would just flatten out some, and the smaller I would smash like smash burgers.Topped with provolone.
     
    Rolls were just from a store bakery and browned in the burger oils.

    They were not bad, I made mine with a double patty and the GF had one of the thicker ones. She could taste the ranch and she liked them, I couldn't taste those flavors, maybe because of the crust on them. She had mayo on hers and pickles onions and mustard on mine.

    They were not bad, if I made them again I may cut back on the sour cream, or even use plain yogurt, bump up the seasoning a bit more. I would not smash flat and use 150 plus gram balls, would maybe do 2 slices of cheese on each, this was presliced/preppackaged stuff from the store. It could have been walmarts brand. The cheese needed to be melted on them to help hold them together I think. I had seen someone add breadcrumbs to try to help them stay together. If you want thin smashed burgers just maybe leave out the sour cream I think that is what causes them to fall apart.

    The pictures are not great, I am not a photographer like so many on here are.
  • #149 by pmillen on 07 May 2024
  • Yep.  I've been reading about them for a while.  At first I thought that it was a gimmick, but the more I had the more I'm convinced to try them.

    Thanks for posting.
  • #150 by Bentley on 07 May 2024
  • Never heard of them!
Pages:
Actions