Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1]   Go Down

Author Topic: What’s the best way to clear my auger tube?  (Read 4522 times)

0 Members and 1 Guest are viewing this topic.

ArborAgent

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 254
  • Hank Hill would be so disappointed in me.
What’s the best way to clear my auger tube?
« on: February 02, 2019, 04:29:07 PM »
I think there’s something wrong with the pellets in my auger tube. My grill can’t get above 150 and errors out. I want to empty the grill and put fresh pellets in to see if that fixes it.

My plan is to empty the pellets and push the prime button until nothing comes out. Does that sound reasonable?
Logged
Rec Tec Bull Blaze Gas Grill Weber Master Touch

Bentley

  • Administrator
  • Your at the point in life...one pit is enough...
  • *
  • Online Online
  • Posts: 9357
  • Mayberry
Re: What’s the best way to clear my auger tube?
« Reply #1 on: February 02, 2019, 06:16:41 PM »
Without pulling the auger out I assume?
Logged
"‘One who puts on his armor should not boast like one who takes it off.’”

ArborAgent

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 254
  • Hank Hill would be so disappointed in me.
Re: What’s the best way to clear my auger tube?
« Reply #2 on: February 02, 2019, 06:27:22 PM »
exactly. I’d rather not change anything mechanically.
Logged
Rec Tec Bull Blaze Gas Grill Weber Master Touch

GREG-B

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 512
  • Washougal WA
Re: What’s the best way to clear my auger tube?
« Reply #3 on: February 02, 2019, 08:20:19 PM »
What I've done a couple of times, and it's worked.   Empty the hopper until you can see the auger.   Take a wooden shaft (hammer handle), turn on the pit and gently tap on the auger with the wooden shaft with a hammer.   So far it's worked every time.
Logged
If the women don't find ya handsome, they should at least find ya handy.

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3305
  • This pistol is most fun for the buck
Re: What’s the best way to clear my auger tube?
« Reply #4 on: February 02, 2019, 08:30:52 PM »
Nothing is stuck.  You just want to clean out all of the existing pellets.

Sure.  Your idea to empty the hopper (vacuum) and then run the auger with the prime button until nothing drops seems like a perfect plan.
Logged
Paul

MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6798
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: What’s the best way to clear my auger tube?
« Reply #5 on: February 02, 2019, 08:50:59 PM »
If you just want to empty the pellets that are in the auger shaft, clear everything out of the hopper and turn the grill on as high as it will go.  Every pellet in the shaft should flow through to the burn pot pretty quickly. [Step 1]

If you think you have an auger jam, that is a different story.  You should probably do Step 1 and let the unit cool.  Then you need to figure out how to get to the auger so that you can remove it from the shaft.  I have had to do this in my MAK and Traeger and will have to do the same in my Pit Boss vertical.  It differs depending on the unit. Often requires disconnecting the auger and fan from the controller.  May require hitting the auger with a mallet or some sort of shank on the auger with a mallet.   May also require some sort of pry bar to get the auger to move.

Best of luck to you.  Not a fun project which is why I have put it off on my Pit Boss for what will probably be close to a year until I get to it.  Some grills are easier than others to get to the auger.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2680
  • HAPPY COOKING, Canadian John
Re: What’s the best way to clear my auger tube?
« Reply #6 on: February 03, 2019, 08:26:13 AM »

  As a final touch, once the hopper and auger have been emptied, use a leaf blower, compressed air or a vacuum cleaner w/ the hose reversed, to blow out the hopper and auger tube from the hopper end...You

 should find mucho dust and nasties are expelled using this method.

Logged

KNIGHTDAD

  • Knows what a Pellet Is.
  • *
  • Offline Offline
  • Posts: 21
Re: What’s the best way to clear my auger tube?
« Reply #7 on: February 06, 2019, 10:21:08 PM »
I’m trying to follow. Is it a pellet feed problem or temp not rising problem? First check if your getting pellets into pot. That should be easy to check, empty the pot and start the grill then check if pellets are making it into the pot. If no pellets are making it into the pot it’s either a blockage in auger tube or auger motor failure. If the auger is turning I would doubt its a auger problem. If you are getting pellets into the pot but temp is not rising its whole different issue, likely linked to a faulty fan. I had this same problem, mine ended up being a faulty fan.
Logged

ArborAgent

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 254
  • Hank Hill would be so disappointed in me.
Re: What’s the best way to clear my auger tube?
« Reply #8 on: February 06, 2019, 10:22:19 PM »
Interesting! I’ll see if the fan is running. I assume I just have to look underneath where the controller is and see if it’s spinning?
Logged
Rec Tec Bull Blaze Gas Grill Weber Master Touch

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2680
  • HAPPY COOKING, Canadian John
Re: What’s the best way to clear my auger tube?
« Reply #9 on: February 07, 2019, 10:15:21 AM »

 A mirror and if needed, a light will save you from lying down and looking up @ the fan.
Logged

KNIGHTDAD

  • Knows what a Pellet Is.
  • *
  • Offline Offline
  • Posts: 21
Re: What’s the best way to clear my auger tube?
« Reply #10 on: February 14, 2019, 10:11:19 PM »
With mine the fan was still turning but not at enough RPM’s to feed the pot. After it was replaced the sound was very noticeable from a distance.
Logged
Pages: [1]   Go Up
« previous next »