Pellet Fan
Pit Talk -- Comments and Questions Regarding These Pellet Pits => Firecraft => Topic started by: Mikro on May 17, 2020, 06:57:11 PM
-
Hi All, Been a while since I posted. Thought I would leave this here for those having issues with the Q450 buttons not working. I will be using momentary switches on a new panel I am making to replace the membrane switches. Will have to make a new wiring harness to the pins for this to work.
Here is a look at the wiring for anyone wanting to know where things go. BTW the ground is a common ground to all of the switches.
MK
-
Excellent and very informative post. The photos are excellent. This may very well help someone else..Thank you!
I would like to see your switch layout once its done.
-
Excellent and very informative post. The photos are excellent. This may very well help someone else..Thank you!
I would like to see your switch layout once its done.
No problem John and thank you. I have a few designs I am working on. My thought process is to move them to the left to cut down on any heat problems from the firebox as I plan on using plastic or wood for it to keep cost down. Milling a new aluminum face plate is time consuming and not cost effective. I figure people will be having issues with the Lousiana grill that has this board as well.
Mike
-
Bump.