Pellet Fan
All Things Considered => General Discussion--Food Related => Topic started by: pmillen on September 05, 2017, 02:25:16 PM
-
It seems as though GrillGrates (https://vhr1xw-ch3301.files.1drv.com/y4mGi0lecOhCHTqr2BbYvBMtiJnoDak8PAjjvwgsk77u9jv9VamyqSlTT-jF1xixmQwkb-Jq_dCEZ3VQJ-bsVpDX2OAezwmAAXCr33sNTfkmA0AQk9vvBPVe9on6rBiFFpiGNMfPrSogpHfYpFy_TY7tpCoLqYx-LaErRXoneBAwvmm_QqCG4JTjUgGOVgUkqI3fqaawlESBCMnmrvnT7Y15g?width=64&height=25&cropmode=none) have been hot the past few years.
(See what I did there? GrillGrates...Hot. I crack me up.)
So—Do you use them in your pellet unit?
-
Have a set that I used to use quite frequently with the Daniel Boone. Not because it would not get hot enough to grill, but I never was fond of the thin grates. Had all the pits together in Pasadena...Since having only room for one unit on the patio here, we chose to put the Pro on patio and it simply does not need it for heat or grill size.
Still a good product!
-
Because of the PG's char broiler and the heating power zone 1 has, just never thought them necessary. I guess thinking about cleaning them deterred me the most.
-
I think I have two sets but have not used them yet. Another one of those these look great I gotta buy some pellet grill traps. One of these days I need to give them a try as people seem to be pleased with the results.
-
Because of the PG's char broiler and the heating power zone 1 has, just never thought them necessary. I guess thinking about cleaning them deterred me the most.
They clean easily. I use them, but not on my pellet unit.
I don't think that would work well in a PG500/1000. I think that, without modification, they would disrupt the carefully engineered air flow.
(https://ydbalw-ch3301.files.1drv.com/y4mME3DdCwut46-6qZK6AhcZrXTwKj0dCIbzoxn4D9ASh7PEO5MIlknIZ1rXeHZbQo_KOS-uPe76t4spdWP_bluNUgPTU1YvDfRVUGliBd8mjS3m-2W8GeJ9HHbroplCiP7t4TDxPX3S_2axUISmJvLNOoHTBg_J3kRO-bLDss-RoNQtOSDn7eWtWiWYJIsJWqWx_46RUYFK47XKvcJMxBpQg?width=320&height=194&cropmode=none) (https://kk2lug-ch3301.files.1drv.com/y4mrLBabeLizUG1_CRqYPIdmlYyAPl11vY4daSC3o1C9FfcOGtmaPFh1japbOxRBxY3Ljhv61VjTuQAu9wqD1TpLFNgR6Z2ewS8f9ZVkz1md-LT1TAlui1p1UCvNfl5hdPhSfuUKM03OVSGA9FQnn7z05f0l3bwWhpmE2TJo0ByN6uAAwzLv9VoWRBQHDg3e_Szy7XkSGrePMqxbYDzHISc4A?width=320&height=194&cropmode=none)
You can grind some of the material out with a Dremel Tool or equivalent and they seem to work okay.
-
I mostly cook below 275 degrees in the pellet pit, but on the rare occasions I go high, I'll throw in the Grill Grates, which I purchased for my gas grill that has significant uneven temperatures. The Grill Grates have smoothed out the hot spots, which develop even in my pellet cooker Traeger) at higher temperatures.
-
Because of the PG's char broiler and the heating power zone 1 has, just never thought them necessary. I guess thinking about cleaning them deterred me the most.
Ditto with the Memphis Pro. Capable of high searing heat (650°).
Z
-
I dont use them on the Memphis Elite, I do use them on my charcoal grill and gasser as the grates are thin especially on the charcoal grill.
-
I use them at home for Competition side categories and will use them for a second year at the World Food Championships, great product...
-
I have some. Haven't used it but twice.
I need to get use to using them more.
Got a good deal on them, traded a thermopop for them
-
I have seen folks flip them and use as a griddle. I prefer a "grilled" burger, as opposed to a flattop for lack of a better term burger. I guess it is much like Burger King over McDonalds...as far as how the burger is cooked. Some really like that burger crust, maillard reaction I guess!
-
This is a bit off topic, but I really like the grates to do chicken thighs on the gasser - because of the small holes, high flame never reaches the meat as the fat in the thighs melt, drips into the flame, and catches fire. Using the Grill Grates is one of the few times I don't end up with soot on the thighs. I probably just need to get more practice on the pellet cookers because of the way the fat drains.
-
Both A and B above since there is no "Both" answer :)
-
I have tried them on my Memphis Pro but it will get to 650° So I quickly realized I have no need for them
-
Because my Traeger Jr is at the bottom of the spectrum for grilling, I use them for steaks, chops, burgers etc. I also find them useful when doing veggies that need to be flipped. That custom fit spatula is the bomb.
-
That custom fit spatula is the bomb.
It's a forkula.
-
I used to use them until I upgraded my Pro to open flame technology. Even though the pro can go to 650 I liked them because I could get nice marks at lower temps.
-
ive used them a few times but didnt see any difference in the end product in taste. Now with the Pro definitely dont need them.
-
I use them occasionally with great success. I've even put the buns on them to toast them up a bit. Works great with brats...
-
We use ours. Upside down a lot for fish and burgers. Right side up for veggies
-
I have a full width set for my CS450 and I'm really happy with them overall. Most of the time I leave only 1/2 of them in (on the left, over the firebox), and have a regular grill on the right half. This makes things pretty versatile for the amount I typically smoke and grill.
They have also replaced my use of baskets for things such as fajitas - I put the grates in full-width and upside down as a flat-top. They work really well for this, and cook much faster and more even.
The CS450 has a searing port, but it tends to have a lot of flare up with regular grates - the grillgrates help a bunch with that, though it can be tricky to keep them below 800 degrees when over direct flame.
-
I'll post a couple pictures of these in my grill.
First up, some drumsticks:
-
Flipped over as a flat-top with bacon:
-
My usual configuration - but simple to snap in two more grillgrates to get full width, or take them all out and put the other regular grate in as needed.
I ordered full-length grates, but you can also just place them on top of the regular grates if you prefer.