Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1]   Go Down

Author Topic: Pellet Feed Used to Regain Temperatures  (Read 1488 times)

0 Members and 1 Guest are viewing this topic.

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Pellet Feed Used to Regain Temperatures
« on: January 23, 2018, 10:54:05 AM »
 Yesterday, " wilpark " posted about the new L G 860 Estate ( youtube link )..As the controller looks to be the same as the Kuma and pre wifi Memphis, I was drawn to the comment on using the pellet prime button to bring the temperatures back more quickly after

 the lid was opened and closed.. Not that it takes long to regain temps on the Memphis.. I would think it would take some getting use to, the timing and amount of pellets. 

 Has anyone tried this and if so what were the results?
Logged

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6891
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: Pellet Feed Used to Regain Temperatures
« Reply #1 on: January 23, 2018, 11:27:53 AM »
I have never used the prime button and up until someone on here mentioned it a few weeks back didn't even know I had one.  May use it in cold temps to get some pellets in there faster.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

ZCZ

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 1061
Re: Pellet Feed Used to Regain Temperatures
« Reply #2 on: January 23, 2018, 12:24:09 PM »
Sometimes if its cold out I might throw in a few extra pellets by hand before I start the grill.
Z
Logged
2013 Memphis Pro
24th in Ribs at the 2015 American Royal
Titus 3:3-7

triplebq

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 1220
  • If you are looking you ain't cooking
Re: Pellet Feed Used to Regain Temperatures
« Reply #3 on: January 23, 2018, 02:02:01 PM »
I just use the prime button on my Grid Iron to get the unit started. When I open the lid and the temp goes down the controller just runs the auger to feed more pellets etc. Well I assume that is how it should work. I really don't pay much attention to it.
Logged
Orion Smoker Blaz'n Grid Iron Cookshack FEC-120 Cookshack Charbroiler CB036

Mudflap

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 399
  • Sunset in Harrisburg Oregon
Re: Pellet Feed Used to Regain Temperatures
« Reply #4 on: January 23, 2018, 02:17:24 PM »
I would think most controllers do that already. Seems like a way to overload the fire pot. Person pushes button to dump more in and then the controller dumps more in also...

Can you use that function to clear the auger tube and refill when changing out pellet.

Mudflap
Logged
Just want to cook good food. DB GMG

triplebq

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 1220
  • If you are looking you ain't cooking
Re: Pellet Feed Used to Regain Temperatures
« Reply #5 on: January 23, 2018, 06:51:27 PM »
Quote from: Mudflap on January 23, 2018, 02:17:24 PM

Can you use that function to clear the auger tube and refill when changing out pellet.

Mudflap

I don't see why not. Should work.
Logged
Orion Smoker Blaz'n Grid Iron Cookshack FEC-120 Cookshack Charbroiler CB036

TravlinMan

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 214
Re: Pellet Feed Used to Regain Temperatures
« Reply #6 on: January 23, 2018, 09:06:27 PM »
Never had an issue on the Memphis, once heated, it recovers quickly - as long as pellets are in the hopper.
Logged
Memphis Pro * Louisiana Grills LG-700 * Country Smoker Traveller * Traeger PTG

Bentley

  • Administrator
  • Your at the point in life...one pit is enough...
  • *
  • Offline Offline
  • Posts: 9681
  • Mayberry
Re: Pellet Feed Used to Regain Temperatures
« Reply #7 on: January 24, 2018, 06:17:13 PM »
Once my Memphis Pro has been on and at temperature for a while, its recover after being opened is pretty responsive.
Logged
Bacon is a Gateway Food...

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6891
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: Pellet Feed Used to Regain Temperatures
« Reply #8 on: January 24, 2018, 06:33:00 PM »
Quote from: Bentley  on January 24, 2018, 06:17:13 PM
Once my Memphis Pro has been on and at temperature for a while, its recover after being opened is pretty responsive.

Agreed, I suppose that may be due to it being so well insulated.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

Conumdrum

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 287
  • I love cooking good food for friends and family
Re: Pellet Feed Used to Regain Temperatures
« Reply #9 on: January 24, 2018, 06:44:48 PM »
My YS640 has good temp recovery since the walls are so thick.  And there is a prime button for pellets.  Living in a warm climate where I rarely cook under 40f (and use the cheapo welding blanket and moving blanket method) for an overnight cook I have never had to use it.  I can see some needing to add extra, but overfeeding can make a fiery mess.

I dunno, pellet smoker have limitations we all have to deal with.  And since a smoke is meant to cook for many longs hours a bit of a drop in temp is not a big deal.  Many pellet smokers have so many other fast cook features now that times are a changin for sure. 
Logged
Started with Masterbuilt 30 analog, now my cold smoker Got a YS640 3+ years, happy camper Got a Weber performer with a Vortex, best charcoal grill ever Sold my gasser, Retired, gardening, clean, cook.Life is good!

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Re: Pellet Feed Used to Regain Temperatures
« Reply #10 on: February 17, 2018, 10:20:53 AM »
Quote from: Canadian John on January 23, 2018, 10:54:05 AM
Yesterday, " wilpark " posted about the new L G 860 Estate ( youtube link )..As the controller looks to be the same as the Kuma and pre wifi Memphis, I was drawn to the comment on using the pellet prime button to bring the temperatures back more quickly after

 the lid was opened and closed.. Not that it takes long to regain temps on the Memphis.. I would think it would take some getting use to, the timing and amount of pellets. 

 Has anyone tried this and if so what were the results?
I have tried this several times and found there is no advantage to it. That was done mostly on cold winter days... My Pro is quick to recover from being opened, due in part to the controller and its programming.
Logged
Pages: [1]   Go Up
« previous next »