Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1] 2   Go Down

Author Topic: Controller Problem  (Read 4659 times)

0 Members and 2 Guests are viewing this topic.

jgrayson

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 125
Controller Problem
« on: September 04, 2018, 04:21:33 PM »
Hello,

I went out yesterday to cook up some chicken.  One whole bird that we spatchcocked, several leg quarters, and a bunch of wings.  When I turned on the Q450, the controller read-out was flashing 180  and done.  The machine would heat up to my set point - 275 degrees, and then immediately begin to cool down.  I realized that the controller believed I was operating with a temperature probe attached (I was not), and the controller believed that my cook was complete.  After realizing that's what was going on, I got a temperature probe.  After plugging it in and then inserting it into the breast of my whole chicken the cook proceeded as planned.

Has anybody else run into this?  I'm curious if this will be an on-going issue for me.  I suppose that if the issue persists that I will get a lot of use out of the temperature probe. 

If this gets worse, does anybody know if there are any controllers around to replace the original one?

Logged
Have fun, John Yoder YS640S; Oklahoma Joes The Judge Charcoal Grill

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6891
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: Controller Problem
« Reply #1 on: September 04, 2018, 05:29:54 PM »
Seems like for some reason it thinks it is in the program cook mode.  Is there a way to turn it off?  I have never used that feature on my Memphis (older controller model).  I think they are similar controllers.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

bucky919

  • Using less gas.
  • **
  • Offline Offline
  • Posts: 43
Re: Controller Problem
« Reply #2 on: September 05, 2018, 09:15:15 AM »
I have never seen this happen, but I would have tried unplugging it and see if it did it again. Maybe with the grill off spray some electrical cleaner in the probe port, maybe some moisture or dirt got in there.
Logged
FireCraft Q450

jgrayson

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 125
Re: Controller Problem
« Reply #3 on: September 11, 2018, 12:32:48 PM »
Hello,

Just a quick update on this issue.  I have cooked a few more times and found the issue to be intermittent.  My next cook was burgers and I didn't have a problem.  Then I did chicken again and had the problem.  My next cook was flank steak and again the problem surfaced.  Each time the controller works perfectly when I get the temperature probe installed.

I'll go with the suggestion to use some electrical cleaner in the probe port to see if it helps.

Logged
Have fun, John Yoder YS640S; Oklahoma Joes The Judge Charcoal Grill

W6YJ

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 221
Re: Controller Problem
« Reply #4 on: September 20, 2018, 11:21:19 AM »
Curious to see if anyone from Firecraft ever responded to your support query.
Logged

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3364
  • This pistol is most fun for the buck
Re: Controller Problem
« Reply #5 on: September 20, 2018, 11:49:50 AM »
Quote from: W6YJ on September 20, 2018, 11:21:19 AM
Curious to see if anyone from Firecraft ever responded to your support query.

I think FireCraft has folded their tent.

I Heard It Through The Grapevine
                               Marvin Gaye
Logged
Paul

Lone Star Grillz Texas Edition Direct Offset - MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

jgrayson

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 125
Re: Controller Problem
« Reply #6 on: September 20, 2018, 12:11:52 PM »
Well, the controller problem has gotten worse for me.  I tried to do some chicken last night, but the controller would not turn on.  I tested electrical connection to the smoker with a desk lamp, and that would turn on.  I then had my son plug it in, and I looked at the controller screen.  Immediately after plugging it in, the controller responded with "Q450" and some number which I assume is the firmware version of the controller.  This confirmed for me that power is getting to the controller, but it still would not turn on.

I am going out of town this weekend, so I have halted my testing and cooked my chicken for dinner over in the charcoal grill.

I have sent an e-mail message to the Fire Craft support address.  It's has only been a few hours, so I am hesitant to say they are dragging their heels with responding to me.  I'll try calling them this evening when I'm able to stand next to the smoker.

Logged
Have fun, John Yoder YS640S; Oklahoma Joes The Judge Charcoal Grill

Bentley

  • Administrator
  • Your at the point in life...one pit is enough...
  • *
  • Offline Offline
  • Posts: 9681
  • Mayberry
Re: Controller Problem
« Reply #7 on: September 20, 2018, 02:28:34 PM »
After hearing a few things in the last couple of weeks, I think you maybe right!



Quote from: pmillen on September 20, 2018, 11:49:50 AM
Quote from: W6YJ on September 20, 2018, 11:21:19 AM
Curious to see if anyone from Firecraft ever responded to your support query.

I think FireCraft has folded their tent.

I Heard It Through The Grapevine
                               Marvin Gaye
Logged
Bacon is a Gateway Food...

ylr

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 446
  • Cheap Screw Specialist
Re: Controller Problem
« Reply #8 on: September 20, 2018, 06:39:11 PM »
Doesn't sound good; this is from their Facebook page:

Brent Gros
September 18 at 4:26 PM
Is FireCraft still in business? I’ve been waiting on a replacement control board for two months and no one is answering the phone lines.
Logged
Pit Boss 820

W6YJ

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 221
Re: Controller Problem
« Reply #9 on: September 20, 2018, 08:02:56 PM »
Oh, that's not good at all.

With the massive product line removal they went through, then the Q450 going out of stock for the last six months or so, the Firecraft rep no longer posting here or at the old site, it definitely seems like the end of the road to me.

When jgrayson posted about his controller issues I thought maybe I should order a spare controller 'just in case'. At this point, that seems to now be unobtanium.

Hopefully my controller will outlast the Q450.

Sad....
Logged

bten

  • Using less gas.
  • **
  • Offline Offline
  • Posts: 66
Re: Controller Problem
« Reply #10 on: September 20, 2018, 09:10:37 PM »
you may want to look at the new REC TEC wifi controller.  It is only $99, and comes with two probes.  The old Rec Tec controller was very similar to the Firecraft controller.  It may work.
Logged

bucky919

  • Using less gas.
  • **
  • Offline Offline
  • Posts: 43
Re: Controller Problem
« Reply #11 on: September 21, 2018, 09:08:34 AM »
I have one on order for my Firecraft, it does look like its going to be plug and play, back sides of the boards look almost identical. My ship date is the week of 10/8. Ill post when I receive it.
Logged
FireCraft Q450

jgrayson

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 125
Re: Controller Problem
« Reply #12 on: September 21, 2018, 09:20:05 AM »
I think I will get in line for a RecTec controller now.  It seems that it takes a while to get one.
Logged
Have fun, John Yoder YS640S; Oklahoma Joes The Judge Charcoal Grill

Mikro

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 223
Re: Controller Problem
« Reply #13 on: September 30, 2018, 02:05:03 PM »
This is disturbing news that I read here about Fire Craft. Figures they would fold, I always seem to pick a DUD!! Mine is rusting badly, now my probe is dead. My son in law is having no issues yet. I should be in Austin for Thanksgiving, maybe I will just go by and see what is going on?
Dang it, this aggravates me.
MK
Logged
Firecraft Q450
RecTec 590/Stampede
HomeBrew Upright/Vertical Pellet smoker

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Re: Controller Problem
« Reply #14 on: September 30, 2018, 02:30:53 PM »

 Sorry to hear about your experiences with Fire Craft..That is a major let down for sure.  I am sure there are adaptable replacement parts that will work.  Good luck.
Logged
Pages: [1] 2   Go Up
« previous next »