Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1]   Go Down

Author Topic: 500 degree burn off  (Read 7774 times)

0 Members and 1 Guest are viewing this topic.

Jon515

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 117
500 degree burn off
« on: September 14, 2018, 06:41:03 PM »
Every time I do the high range of temps I end up with a fire.  Yesterday I made breakfast in a copper pan at 350, decided it was cool out so I'd do a burn off. My "high" alarm starts going off, wickedly ugly smoke coming out of the stack, I opened the lid and sure enough, fire.  I put the cap down and let it sit, I'm sure it fried my temp probe but thats not a big deal.  I clean the grill out maybe not as often as I should, but does anyone have suggestions on how to minimize these flare ups?
Logged

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6989
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: 500 degree burn off
« Reply #1 on: September 14, 2018, 07:04:42 PM »
What grill do you have?
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

Jon515

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 117
Re: 500 degree burn off
« Reply #2 on: September 14, 2018, 08:45:15 PM »
Daniel Boone
Logged

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6989
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: 500 degree burn off
« Reply #3 on: September 14, 2018, 10:05:01 PM »
Unfortunately, that is a brand that I do not own.  You may be better served posting in the main board thread first to get some other folks to see your thread.

Some general comments:

1) make sure the drip tray is clean
2) make sure the drip bucket is not full
3) clean ash from fire pot
4) don't go from a slow cook of a greasy food to high heat cook without cleaning drip tray

I'm sure many others will have some good ideas too.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

Brushpopper

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 974
  • "The road goes on forever...
Re: 500 degree burn off
« Reply #4 on: September 14, 2018, 10:53:26 PM »
I've got a GMG DB and never had such problem.  It's a 2011 with the upgraded wifi controller and SS heat shield.  Works wonderful unless I don't clean it out when I should.  Sorry that ain't much help.
Logged
And the party never ends!!" by Robert Earl Keen; Woodwind Pro 24 with Sidekick Sear and griddle top

reubenray

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 955
  • Bella Vista, Arkansas
Re: 500 degree burn off
« Reply #5 on: September 15, 2018, 08:24:41 AM »
I have done this several times with my DB without a fire.  I bring up temps slow until I get to the 500 degree range.  Normally between 400 and 450 I can see the smoke from the grease being burned off.  I am right there the entire time just in case.
Logged
Traeger Junior, Smokin Brothers PP36 and 17" Blackstone Griddle

Mudflap

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 399
  • Sunset in Harrisburg Oregon
Re: 500 degree burn off
« Reply #6 on: September 15, 2018, 11:04:35 AM »
Quote from: reubenray on September 15, 2018, 08:24:41 AM
I have done this several times with my DB without a fire.  I bring up temps slow until I get to the 500 degree range.  Normally between 400 and 450 I can see the smoke from the grease being burned off.  I am right there the entire time just in case.

+1

I also do high temp burn off after I was having soot problem. GMG suggested I do the burn off. As others have said raise temp slowly. It depends on how dirty the grill is. I usually bring up to 350 first then go to 400. I then proceed to raise the temp by 25 only after the majority of the smoke is gone. My opinion is that flareups will happen if the grease gets hotter then the flash point but if you burn off slowly in a controlled matter you will not get the flareups. Yes it will take some time but if you start with a cold grill and scrape the majority off then it will be faster.

Some topics related to this.
https://pelletfan.com/index.php?topic=1528.msg17025#msg17025
https://pelletfan.com/index.php?topic=2804.msg34468#msg34468

Mudflap
Logged
Just want to cook good food. DB GMG

Jon515

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 117
Re: 500 degree burn off
« Reply #7 on: September 15, 2018, 12:59:14 PM »
Thanks for all the replies.  I cleaned the grill today, it was dirty, but not terrible.  Next time I'll try the 350 and 25 degree increases.
Logged

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2700
  • HAPPY COOKING, Canadian John
Re: 500 degree burn off
« Reply #8 on: September 15, 2018, 02:05:44 PM »
 Is the pit level - front to back/left t o right? If not drainage will be compromised.

 Dirty is relative. One mans dirty may be  clean for an other.   :D
« Last Edit: September 15, 2018, 07:34:18 PM by Canadian John »
Logged

sleebus.jones

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 179
  • I like meat
Re: 500 degree burn off
« Reply #9 on: September 15, 2018, 04:49:25 PM »
When I go from a greasy cook to a high temp, I don't exceed 400° until the smoke slows down.  Even though 6" of flame shooting out the stack looks pretty cool, it's likely not good for the grill.   ;D  425° seems to be the magic flashover temp most of the time, so don't go that high until the smoke slows down.
Logged
-=<Cookshack PG1000 | GMG Davy Crockett WiFi | GMG Jim Bowie WiFi | Cinderblock rev flow pit | Weber S-670>=-

Clonesmoker

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 349
Re: 500 degree burn off
« Reply #10 on: September 18, 2018, 08:13:55 AM »
Is the temp correct?  I maxed my DB out at 500 and the internal oven therms I had in it went to around 700. It got so hot it started to burn the wire harness on the fan.
« Last Edit: September 21, 2018, 02:37:34 PM by Clonesmoker »
Logged

Jon515

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 117
Re: 500 degree burn off
« Reply #11 on: September 20, 2018, 09:01:27 PM »
Quote from: Canadian John on September 15, 2018, 02:05:44 PM
Is the pit level - front to back/left t o right? If not drainage will be compromised.

 Dirty is relative. One mans dirty may be  clean for an other.   :D
Pretty darn close to level.
Logged

silverbullet

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 320
  • I thought my House was Child Proof then one got in
Re: 500 degree burn off
« Reply #12 on: September 29, 2018, 12:33:50 AM »
Never had a problem doing a high temp burnoff on any of the GMG's I've owned/own. I've had a couple fires in my DC but not from a burnoff.

My Louisiana LG800 Elite, That's a story for another day
Logged
GMG DC Camp Chef WW24

Redapple

  • Using less gas.
  • **
  • Offline Offline
  • Posts: 89
Re: 500 degree burn off
« Reply #13 on: October 15, 2018, 10:55:14 PM »
Just did a burn off last weekend. Let it run for nearly 3 hours at 450. I do remove the deflector and grease tray and scrape out vacuum first,  then do the burn.  Works great. When done and cooled down, I hit it with a wire brush, vacuum the firepit again then prime with a few pellets and put it back together.
Logged
Pages: [1]   Go Up
« previous next »