Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1] 2 3   Go Down

Author Topic: Member Prize Drawing -- ThermoWorks Signal  (Read 2079 times)

0 Members and 1 Guest are viewing this topic.

Kristin Meredith

  • Administrator
  • You are starting to smell like smoke.
  • *
  • Offline Offline
  • Posts: 3343
Member Prize Drawing -- ThermoWorks Signal
« on: July 07, 2020, 05:02:35 PM »
ThermoWorks has very graciously given PelletFan the ThermoWorks Signal to give away to one lucky member.  Thank you ThermoWorks!!!

If you wish to be entered in the drawing, you need to do the following (it is a bit different than prior drawings, so pay attention!):
 
1.  To receive a drawing number, you need to post, in this thread, a comment about the Signals product or something you observed and liked in the review.  It does not need to be lengthy, but needs to be specific -- no "I really like this product".  So, for example:  "I like 'X' feature on the Signals" or "I like that 'Y' was tested on the Signals."

2.  I will read your post and then assign you a number, again in this thread, in your post.

3.  We will keep this thread open and accepting entries until 8 pm (Eastern) on Tuesday, July 14.

4.  At 8:30 pm (Eastern) on July 14, I will use the random number generator to pick the winning number and announce it in this thread.

5.  One entry per member.

6. The winner must be willing to provide an address, via PM, to me so that we can send the unit.

Any questions, please either PM me or post here.
« Last Edit: July 07, 2020, 05:09:10 PM by Bentley »
Logged

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6891
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #1 on: July 07, 2020, 05:15:26 PM »
Good luck to those who enter the drawing!  I will not be entering as I already own one that I have yet to use due to pure laziness.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

WiPelletHead

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 298
  • Mondovi WI
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #2 on: July 07, 2020, 06:05:16 PM »
First off a big THANK YOU to Thermoworks and also to Bentley and Kristen for doing this.

A couple things that I liked about the Signals.

1. How well and easy the WIFI was use. I followed the brisket cook quite a bit with no issues at all.
2. The range of the Bluetooth.

Good luck to all that enter.

Entry No. 15 (I am starting higher up because I think folks think lower numbers have less of a chance!)
« Last Edit: July 07, 2020, 06:22:41 PM by Kristin Meredith »
Logged
Weber Searwood 600

smokin soon

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 179
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #3 on: July 07, 2020, 06:31:05 PM »
Excellent review. I did see a few things I liked over my current Tappeque. Also the ability to add a bellows fan is nice to have available if needed.

Entry No. 16
« Last Edit: July 07, 2020, 08:06:55 PM by Kristin Meredith »
Logged

Osborn Cox

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 217
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #4 on: July 07, 2020, 10:09:43 PM »
I was also interested in the range of the Bluetooth because we don’t have WiFi at the summer cottage, and the combination of WiFi and Bluetooth makes this product particularly interesting to me.    Thanks to Thermoworks and Bentley/Kristen for the review.

Entry No. 17
« Last Edit: July 08, 2020, 06:49:40 AM by Kristin Meredith »
Logged
Cookshack PG1000, GMG Jim Bowie Prime, Traeger Lil Tex(retired), Blackstone Griddle

W6YJ

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 221
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #5 on: July 07, 2020, 10:16:46 PM »
I presently have a Fireboard, but definitely like the display on the Signals with all four probes showing at the same time.
I don't have a stick burner, but also like that it can control the Bellows.

Thanks for allowing Bentley to test it.

Entry No. 18
« Last Edit: July 08, 2020, 06:50:20 AM by Kristin Meredith »
Logged

rfinley

  • Using less gas.
  • **
  • Offline Offline
  • Posts: 45
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #6 on: July 08, 2020, 07:53:28 AM »
I liked the fact that Kyle from ThermoWorks was available to answer questions. By the fact that he had
4 posts for the trial kind of says the app and hardware have been well thought out. Many times the apps
lag behind the hardware.  Thanks to ThermoWorks for allowing this product evaluation !!!  Also Thanks to
Bentley for doing the evaluation and giving us "Just the Facts" !!!! 

Entry No. 19
« Last Edit: July 08, 2020, 08:45:56 AM by Kristin Meredith »
Logged

lil moose

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 100
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #7 on: July 08, 2020, 08:44:14 AM »
Wow that's great of ThermoWorks to do this!!   Thanks to them :cool: :clap:

I really like the idea of having 4 channels with this unit because at times I will run two different grills next to each other and would only need the one thermometer to keep and eye on them  :clap:   Also I can relax and use my phone if the temp is way to hot outside  and it gets HOT here!

The other reason THEY WORK!  Love the instant reads I have and they are spot on!! 

Entry No. 20
« Last Edit: July 08, 2020, 08:46:30 AM by Kristin Meredith »
Logged

Brushpopper

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 962
  • "The road goes on forever...
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #8 on: July 08, 2020, 08:47:00 AM »
Thanks to everyone involved with the test and the donation!  I liked the ease of set up and use.  It appears easy enough that even I could do it.

Entry No. 21
« Last Edit: July 08, 2020, 08:49:28 AM by Kristin Meredith »
Logged
And the party never ends!!" by Robert Earl Keen; Woodwind Pro 24 with Sidekick Sear and griddle top

Bar-B-Lew

  • Global Moderator
  • You don't Drink the Kool-aid anymore.
  • ***
  • Offline Offline
  • Posts: 6891
  • Schnecksville, PA
    • Bar-B-Lews Blog
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #9 on: July 08, 2020, 09:10:14 AM »
Quote from: lil moose on July 08, 2020, 08:44:14 AM
Wow that's great of ThermoWorks to do this!!   Thanks to them :cool: :clap:

I really like the idea of having 4 channels with this unit because at times I will run two different grills next to each other and would only need the one thermometer to keep and eye on them  :clap:   Also I can relax and use my phone if the temp is way to hot outside  and it gets HOT here!

The other reason THEY WORK!  Love the instant reads I have and they are spot on!! 

Entry No. 20

I think you will need their cable extensions in order to be able to use this device on more than one grill.  The cables with the unit are about 3ft long I think and the extender adds about 3ft. I have them and they work great.  I have not tried adding to extenders to make it 9ft though so I don't know if that would work.
Logged
MAK 2*, Memphis Elite, Traeger XL, Blaz'n Grand Slam, Pit Boss Copperhead 5, Weber Genesis II 435 SS, Sizzle Q SQ180

MP09

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 213
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #10 on: July 08, 2020, 09:52:45 AM »
I really liked having 4 channels instead of 2. the bluetooth range was impressive and i can see where that would eliminate dead spots at my house. The setup seems to be very easy which is a plus. Thanks again for the review and Thermaworks for donating...

Entry No. 22
« Last Edit: July 08, 2020, 10:42:36 AM by Kristin Meredith »
Logged
BGW Grid Iron and a bunch of old gassers "now retired"

glitchy

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 746
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #11 on: July 08, 2020, 11:03:01 AM »
Best of luck to those entering! I'm hoping that someone that really needs it gets drawn. I love Thermoworks products (except the fridge/freezer alarm I bought that is a pain to program) and think many things about the Signals looks great, but I already have a Fireboard that does everything i need it to and has been regulated to mostly charcoal cooks with WiFi on the pellet grills. About the only time I put it on a pellet grill anymore is overnight cooks to make sure it doesn't flame out and as they keep improving the firmware on the Woodwind and SmokeFire this may not be needed much longer. Great looking product and so cool that Thermoworks donated it to be tested and given away. My decision would have been tough if this was out when I was buying the FireBoard.
Logged
MAK 2* General (2021) | KBQ C-60 | Weber Summit Charcoal w/SnS LP, customized Big Joetisserie, Vortex, and Hunsaker Griddle | Weber Genesis II - S345 | Weber Traveler | Fireboard 2 Drive

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3364
  • This pistol is most fun for the buck
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #12 on: July 08, 2020, 11:33:48 AM »
I'm a PF Global Moderator, so I don't think it's appropriate for me to enter a random drawing, but I wanted to post–
  • To thank ThermoWorks for providing the Signal so we can read a Product Test that we trust.
  • To thank Kyle for taking time from his busy day to act as our resource.  Great company, great guy.
  • To say that to me, the ease of operation is its most valuable feature.  I love using computers but I don't want to be a programmer in order to make the features work.
Logged
Paul

Lone Star Grillz Texas Edition Direct Offset - MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

jdmessner

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 1047
  • Evart, MI
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #13 on: July 08, 2020, 12:58:54 PM »
I would like to join the chorus of people thanking ThermoWorks for providing the Signal for evaluation and to Bentley for doing the leg work. It was a very informative thread. I liked the simplicity of being able to use it with a $79 phone. I think Bentley and I must have very simular taste in phones! I am not real techie minded but I think I could actually figure this one out. Thanks again for all involved!!

Entry No. 23
« Last Edit: July 08, 2020, 02:01:43 PM by Kristin Meredith »
Logged
"If it is not food ~ It's FUN!" - Happy Kyne proprietor of the Bun and Run, Fernwood Ohio

yorkdude

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2231
  • Lake Elbo-Manhattan Kansas
Re: Member Prize Drawing -- ThermoWorks Signal
« Reply #14 on: July 08, 2020, 01:20:05 PM »
Another one to Thank ThermoWorks (Kyle) and Bentley and Kristin.
Good job.
Good luck to the winner.
« Last Edit: July 08, 2020, 03:00:27 PM by yorkdude »
Logged
Pages: [1] 2 3   Go Up
« previous next »