Pellet Fan

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Pellet Fan!

Pages: [1] 2   Go Down

Author Topic: STAINLESS STEEL PROTECTANT  (Read 2685 times)

0 Members and 1 Guest are viewing this topic.

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
STAINLESS STEEL PROTECTANT
« on: October 04, 2017, 10:16:31 AM »

I like to keep my stainless pits looking good. What I had always done was to use some sort of stainless cleaner; sprays,wipes or liquids. The results didn't vary much. They were all good @ removing dust ,fingerprints and light smudges..After the application of the cleaner and buffing the results were always good.  The problem is after the first cook the stainless looked blotchy and faded..I got to thinking - all these S S cleaners I had used contained mineral oil...That led me to applying straight mineral(drug store
variety)..Here is how it went: Ambient 72º..Pit clean, @ ambient and out of the sun.  Wiped on the mineral oil as lightly as possible. It was slightly high on the viscous side(thick). That made  it a bit harder to apply and wipe off. It looked good, not 100%..Later I fired up the pit and while it was warming gave it a buff with a dry cloth..That is all it needed to lower the viscosity just enough to get a super finish..It looked better than any S S cleaner I had previously used.  Now after 3 cooks totalling ~ 6 hours the stainless has the same shiny look to it..The big question is how long will it last? So far it is 3x better than any S S cleaner I have ever used...

Has anyone else gone this route?
« Last Edit: October 14, 2017, 12:13:11 PM by Canadian John »
Logged

LowSlowJoe

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 735
  • Smoking out of southeastern Michigan
Re: STAINLESS STEEL PROTECTANT
« Reply #1 on: October 04, 2017, 10:28:37 AM »

I haven't gone that route... but I find it interesting.  ( my stainless doesn't get cleaned much )
Logged
Fast Eddy PG500, Traeger Texas, Traeger Junior, Traeger PTG, GMG Davy Crockett

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3361
  • This pistol is most fun for the buck
Re: STAINLESS STEEL PROTECTANT
« Reply #2 on: October 04, 2017, 11:49:47 AM »

I struggle to get my SS pit as clean and shiny as I would like it to be so guests who aren't familiar with pits and their typical grungy look aren't turned off.  I try to do the same with pots, pans and trays, just in case someone sees the cookie tray. 

That's SS's downside.  Most of the stuff on my pit's exterior won't show on a black pit.
Logged
Paul

MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

GrillinGlen

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 179
  • Meridian, Idaho
Re: STAINLESS STEEL PROTECTANT
« Reply #3 on: October 04, 2017, 12:16:10 PM »

I've always been super happy with Bar Keepers Friend for getting it clean, I'll have to try that and see how it works keeping it clean. 
Logged
2011 SS Memphis Pro

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Re: STAINLESS STEEL PROTECTANT
« Reply #4 on: October 04, 2017, 12:42:12 PM »

Reply to paul..  When i travelled the deep South I fell in love with the grungy brick pits that were part of almost all BBQ joints. They have such character! In fact  for years I rarely cleaned the outside my pit (only had one then). I related a grungy pit to true BBQ..

So who is right or wrong in the world of Cleanliness?
« Last Edit: October 04, 2017, 12:48:05 PM by Canadian John »
Logged

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3361
  • This pistol is most fun for the buck
Re: STAINLESS STEEL PROTECTANT
« Reply #5 on: October 04, 2017, 01:00:38 PM »

So who is right or wrong in the world of Cleanliness?

I've written this many time before, "Scrubbing a pit's exterior is effort with scant return.  And I've never heard of someone becoming ill because a pit's exterior wasn't shiny."  That's what I tell myself as I scrub away.
Logged
Paul

MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3361
  • This pistol is most fun for the buck
Re: STAINLESS STEEL PROTECTANT
« Reply #6 on: October 04, 2017, 01:09:27 PM »

I've always been super happy with Bar Keepers Friend for getting it clean, 

Barkeeper's Friend doesn't seem to work any better for me that any other scouring compound.  I may not be doing it right.


I'm convinced that there's a chemical that will cut through the stains that look like grease but aren't.  I think they're dried creosote-water that's produced when the pit is warming up and making prodigious white smoke.
Logged
Paul

MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Re: STAINLESS STEEL PROTECTANT
« Reply #7 on: October 04, 2017, 01:34:21 PM »

Paul,Looks good doors up!     There are creosote removers that may work..If the buildup is severe as it looks to be on the left then scraping carefully with the polish marks in the metal should lessen the work the chemical would have to do.  If you ever get it clean and want to keep it that way frequent cleaning should help....Also if the inside of the doors have grungy buildup it may be a contributing factor... OR,just leave it and enjoy it - as I describer the pits down South mentioned above.
« Last Edit: October 04, 2017, 01:38:30 PM by Canadian John »
Logged

WiPelletHead

  • Digging the Pellet Smoke.
  • ****
  • Offline Offline
  • Posts: 297
  • Mondovi WI
Re: STAINLESS STEEL PROTECTANT
« Reply #8 on: October 04, 2017, 04:21:31 PM »

I've always been super happy with Bar Keepers Friend for getting it clean, 

Barkeeper's Friend doesn't seem to work any better for me that any other scouring compound.  I may not be doing it right.


I'm convinced that there's a chemical that will cut through the stains that look like grease but aren't.  I think they're dried creosote-water that's produced when the pit is warming up and making prodigious white smoke.

I've used Members Mark Commercial Over, Grill and Fryer Cleaner from Sams Club.

Spray it on, wait a minute or 2 then wipe off with a wet sponge. Cleaned my PG 1000 and looked like new. No real scrubbing either.
Logged
Weber Searwood 600

Bentley

  • Administrator
  • Your at the point in life...one pit is enough...
  • *
  • Offline Offline
  • Posts: 9647
  • Mayberry
Re: STAINLESS STEEL PROTECTANT
« Reply #9 on: October 04, 2017, 05:24:01 PM »

I believe it is all about a cordless drill, the correct buffing pad, and soft scrub!  Something like this Scotch-Brite...

« Last Edit: October 04, 2017, 05:27:10 PM by Bentley »
Logged
Bacon is a Gateway Food...

Jcorwin818

  • Starting to taste the Smoke.
  • ***
  • Offline Offline
  • Posts: 180
  • 10th SFG (Lenexa, Ks)
Re: STAINLESS STEEL PROTECTANT
« Reply #10 on: October 04, 2017, 06:21:54 PM »

You will have a circular pattern if you use that scotch brite wheel but it will be clean.


Logged
Traeger 075 Texas (USA) WSM 22" Weber Kettle Weber Spirit 310

Bentley

  • Administrator
  • Your at the point in life...one pit is enough...
  • *
  • Offline Offline
  • Posts: 9647
  • Mayberry
Re: STAINLESS STEEL PROTECTANT
« Reply #11 on: October 04, 2017, 07:16:55 PM »

Has never happened on the Memphis...But it is kind of a brushed finish anyway!
Logged
Bacon is a Gateway Food...

pmillen

  • Global Moderator
  • You are starting to smell like smoke.
  • ***
  • Offline Offline
  • Posts: 3361
  • This pistol is most fun for the buck
Re: STAINLESS STEEL PROTECTANT
« Reply #12 on: October 05, 2017, 12:03:05 AM »

I believe it is all about a cordless drill, the correct buffing pad, and soft scrub!  Something like this Scotch-Brite...



Our great minds are in synch, Bentley.


I've been considering this with a very fine grit.
Logged
Paul

MAK 2-Star – M Grills M-36 – Hunsaker Drum – Basic 36" Blackstone Griddle – PK Grill – Masterbuilt 1050 – Kamado Joe Big Joe w/FireBoard Drive & Blower

Canadian John

  • Friends Want you to cook way to much.
  • ******
  • Offline Offline
  • Posts: 2698
  • HAPPY COOKING, Canadian John
Re: STAINLESS STEEL PROTECTANT
« Reply #13 on: October 05, 2017, 09:43:20 AM »

Forgot to add:For a stainless lid that was stained I used a layered cotton wheel w/ some green (for stainless) compound fitted to an electric drill.  The trick is to buff with the grain..It may take some practice but it works..Anything aggressive will leave scratch marks..400 grit is about as far as you want to go if using emery cloth..The higher the # the finer..
Logged

bregent

  • Thinkin about Renouncing Charcoal.
  • *****
  • Offline Offline
  • Posts: 925
Re: STAINLESS STEEL PROTECTANT
« Reply #14 on: October 05, 2017, 04:02:58 PM »

I used a green scotch brite pad to remove some stains from my Memphis. I was not paying attention to the grain direction and now have permanent swirl marks in a few spots.
Logged
Pages: [1] 2   Go Up