For the second year in a row, I was asked to cook smoked salmon for a friend's family Christmas dinner.
Last year was the first time I had done smoked salmon. I started with a test run which turned out too salty. I adjusted the recipe, and it turned out great.
Since I did not write down the recipe, I had to start over. I began with two small pieces of filet. I used a Traeger recipe that turned out too salty.
For a second test I cut the salt in the dry brine mixture in half and reduced the amount of brine mix applied to the salmon. This did the trick.
The second test also included a two-factor experiment where we ran herbs and no herbs in the dry brine mixture, and herbs and no herbs on the salmon during smoking.
Of the four combinations, the best was herbs in the dry brine and herbs on the salmon during smoking.
The final batch to be delivered was two fillets totaling just about six pounds. We did one filet per day since that's what we could fit in our refrigerator for drying and on the smoker.
The dry brine was a 4 to 1 mixture of dark brown sugar and kosher salt with some ground pepper. Herbs were ground basil, granulated garlic, and onion flakes ground with a mortar and pestle.
The dry brine was added to the salmon with each piece wrapped tightly in plastic wrap. Brining time was four hours. Brining was set to finish around 10:00 to 10:30 at night so that the salmon could dry overnight.
After brining, the fish was washed thoroughly to remove all salt and left uncovered in the refrigerator overnight to dry and to create the pellicle.
After adding herbs, the salmon was smoked for about 2 1/2 hours at around 180 degrees until an internal temperature between about 138 and 140 was reached.
The salmon was frozen in vacuum seal bags. The overall process took five days.
I would call the final product more of a dinner smoked salmon rather than a cracker smoked salmon. It was moist and meaty. This is what I was looking for.
The pictures below capture some of the process steps.
[ Invalid Attachment ]
[ Invalid Attachment ]
[ Invalid Attachment ]
[ Invalid Attachment ]